News

The joint part is the weakest link of the abrasive belt under the action of external force. In the production process, the joint of abrasive belt is the key point of technological work, because it is ...

Sometimes, all kinds of problems may occur during the use of abrasive belts. Here are some suggestions for self-inspection for your reference.1. Wrinkling, tearing and deviation of abrasive belt when ...

15. SeamThere is obvious seam penetration on the surface of the finishing coat, and the seams are parallel to each other. They are most common on black or other dark-colored paint surfaces. (1) Cause...

Common paint problems such as orange peels and air bubbles can be mostly avoided in paint repair if right operation methods are adopted. There are several procedures in paint repair, but the likelihoo...

Abrasive belts are needed for both manual grinding and industrial robot grinding. Some knowledge of abrasive belts is helpful for us to make better use of them. The following measures can help us prol...

It is inevitable that the abrasive belts may break during use. So how do we solve this problem?1. Loose and cracked joints of abrasive belts: Strengthen the quality control in production to meet the n...

The requirements of metal, hardware and stainless steel workpieces for polishing abrasive materials are also very high, at the same time, there are requirements in the choice and usage of polishing so...

Metal surface polishing technology is also known as surface leveling technology, and in special cases where the requirement for leveling degree is very high, it is called mirror finishing technology. ...

The selection of abrasive particle size is one of the key factors to determine the machining effect. Generally speaking, the choice of particle size should consider the following aspects.(1) If the ma...

I. Overview of Coated Abrasive ToolsGrinding materials and grinding tools are known as the teeth of industry, and coated abrasive tools are honored as industrial beautician. In most domestic books and...

Sanding wheel is one of the main grinding tools. Due to the different abrasives, binders and manufacturing processes, the characteristics of various sanding wheels are very different, which has an imp...

The heat resistance of glass fiber is better than organic fiber. Glass fiber has the advantages of non-combustibility, corrosion resistance, good heat insulation, and sound insulation, high tensile st...

When polishing metal, it is necessary to have high-quality metal polishing materials such as oil stone, abrasive paper, and grinding paste in order to achieve a high-quality polishing effect. Here are...

Abrasive paper is used for many products nowadays. It is a kind of product for surface grinding and is used in many fields. So what are the types and production process of abrasive paper? Here are a d...

Usually in the grinding process, it should be noted that plain weave, jacquard and high count yarn fabrics should be finer, the grinding tension should not be too large, and the pressure should not be...